June 12, 2022

Controls warping in the vertical direction: 1. Reduce the drag force of the friction plate at the exit of the flyover; 2. Check the overpass pipe

June 11, 2022

Cardboard stacking shapes are nothing more than four: single-row parallel stacking; double-row parallel stacking; well-shaped sub-stacking piling code; multi-row la

June 10, 2022

From Europe and the United States and other regions, corrugated board is the largest number of packaging products, the total amount of about 80 million square meter

June 09, 2022

In order to ensure the strength and good adhesion of the corrugated board, the corrugated board should be adjusted according to the configuration of the corrugated

June 08, 2022

Dry climate in autumn and winter season, corrugated cardboard loss of water often appear pressure line breakage, broken corrugated, molding difficulties and other u

June 07, 2022

The lining mats of various packages made of corrugated cardboard can be designed in various styles according to the needs of the objects to be packaged, and the nee

June 06, 2022

Maintaining the moisture content of corrugated board is the best way to control the board burst. The moisture content of the corrugated board from the tile line is

June 05, 2022

In most of the crushing formulas, most of them are calculated by using the base paper crushing strength. In fact, the crush resistance of the carton is not only the

June 04, 2022

The corrugated box strength standard, GB6543-86 national standard appendix G stipulates: Corrugated box compressive strength value P should not be smaller than t

June 03, 2022

The single-watt single-sided corrugated cardboard was invented by American engineer Athertl.jones in 1871 and was used as a buffer material to wrap fragile glass an

June 02, 2022

The factors affecting the quality of corrugated board printing include plate making, equipment, materials, technology, and environment. 1. Prepress proce

June 01, 2022

Corrugated design needs to be tested in the design of different factors and aspects, designed for different ways, according to the actual industrial methods and

May 31, 2022

The direct offset printing technology for fine corrugated board is maturing with the development of new fine and fine corrugated board, special blankets and inks

May 30, 2022

Corporate decision makers should pay attention to the following issues when choosing medium and high-speed corrugated cardboard production lines. First,

May 29, 2022

The single-layer corrugated cardboard consists of a paper sheet on both sides of the original corrugated medium. Such a structure results in greater strength than t

May 28, 2022

Corrugated board production line is the basis for the production of cartons in the carton industry. The speed of the production line directly affects the hourly rat

May 27, 2022

As corrugated boxes are used to protect packaging products and promote promotional functions, corrugated boxes are required to have rich and colorful information

May 26, 2022

First, do a good job of product market research is the basis for equipment selection Corrugated carton products are a type of products that are large in

May 25, 2022

In recent years, with the improvement of people's living standards, the requirements for the packaging of goods have become higher and higher. Corrugated car

May 24, 2022

Corrugated cardboard and corrugated boxes were tested for five physical properties. Is the side pressure strength, burst strength, puncture strength, adhesive stren

May 23, 2022

The bad sizing is mainly related to the equipment state, adhesive quality, and quality of the base paper of the corrugated cardboard production line. The

May 22, 2022

Four-layer corrugated paperboard is used to coat two layers of corrugated paper with adhesives with special properties, so that the glue penetrates between the f

May 21, 2022

In order to ensure the strength and good adhesion of the corrugated board, the corrugated board should be adjusted according to the configuration of the corrugat

May 20, 2022

Over the years, the printing of corrugated board is merely to apply functional marks on the packaging box of corrugated cardboard, or to simply print in lines an